Non-metallic, moisture-proof NEMA 6P (IP67) junction box with PWSC compression terminals. Not recommended for use in direct sunlight.
- Dimensions: H 4″ x W 4″ x D 2″
- Compatible with all controls
- Operating temperature -22°F to +212°F (-30°C to +100°C)
Non-metallic Moisture Proof NEMA 6P (IP67) Box with DRTB-T-2 Terminal Block. Use as end-of-line box for CTM series modules. Not recommended for use in direct sunlight.
- Dimensions: H 4″ x W 4″ x D 2″
- Operating temperature -22°F to +212°F (-30°C to +100°C)
Fiberglass NEMA-4X (IP66) junction box with PWSC compression terminals.
- Dimensions: H 6″ x W 6″ x D 4″
- Compatible with all controls
- Operating temperature -40°F to +266°F (-40°C to +130°C)
Fiberglass NEMA-4X (IP66) end-of-line box with test switch and PWSC compression terminals.
- Dimensions: H 6″ x W 6″ x D 4″
- Compatible with the PIM-530 series modules (10K ELR)
- Operating temperature -40°F to +266°F (-40°C to +130°C)
Fiberglass NEMA-4X (IP66) end-of-line box with test switch and PWSC compression terminals.
- Dimensions: H 6″ x W 6″ x D 4″
- Compatible with FS2000 and 2600HD ZM-3224 modules (4.7k ELR)
- Operating temperature -40°F to +266°F (-40°C to +130°C)
Fiberglass NEMA-4X (IP66) end-of-line box with test switch and PWSC compression terminals.
- Dimensions: H 6″ x W 6″ x D 4″
- Compatible with SRP-4×4 and 2600HD ZM-2 modules (8.2K ELR)
- Operating temperature -40°F to +266°F (-40°C to +130°C)
Fiberglass NEMA-4X (IP66) Junction box with DRTB-T-2 Terminal Block. Use as end-of-line box for CTM series modules.
- Dimensions: H 6″ x W 6″ x D 4″
- Operating temperature -40F to +266F (-40C to +130)
The SR-502 Series Junction Box Sealed Strain Relief Connector is used when the Protectowire Linear Heat Detector enters or exits the junction box.
- Water and oil resistant
- Material: Malleable iron/zinc plated, rubber seal and O-ring. 1/2″ NPT Thread
- Material: Iron/zinc plated; PVC grommet
- Temperature: Rated at 194°F (90°C)
The SR-502N is used when any Protectowire Linear Heat Detector penetrates junction and end-line boxes.
- Water and oil resistant
- Material: 6/6 nylon and Buna-N Seal 3/8″ NPT thread
- Material: Nylon 6/6:PVC grommet. RoHs compliant.
- Temperature: -40 °F (-40 °C) to 212 °F (100 °C)
The SR-505 Series Junction Box Sealed Strain Relief Connector is used when MS-3091T Retractable Cable enters or exits the junction box. The SR-505 is 1/16” (1.59mm) longer than the SR-502.
- Water and oil resistant
- Material: Malleable iron/zinc-plated, rubber seal, and O-ring. 1/2″ NPT Thread
- Material: Iron/zinc plated; PVC grommet
- Temperature: Rated at 194°F (90°C)
Type TX thermocouple extension grade feed cable available in 200 ft. (60m) or 500 ft. (152m) spools. For information on thermocouple extension grade feed cable within classified hazards, contact the factory.
- 20 AWG
- FEP Teflon Jacket
- Operating temperature -90F to +400F (-67C to +204C)
- UL Listed
MS-3091T Retractable cable compatible with PHSC and CTI Series Linear Heat Detector.
- UV, corrosion, and weather-resistant
- Material: 4 conductor 20 AWG stranded type “TX” thermocouple twisted pairs.
- Fully extended cable length is 99′ (30m)
- Used with strain relief connector model SR-505
- Operating temperature -40°F to 221°F (-40°C to 105°C)
Spare Installation Spool, 3,280 ft. (1,000 m).
Spare Installation Spool, 1,500 ft. (456 m).
Spare Installation Spool, 500 ft. (152 m).
- ZB-HD-4-QC Zone Box
- ZB-5-QC Commercial Zone Box Data Sheet
- ZB-HD-5-QC Commercial Zone Box Data Sheet
- Installation Manual
- MS-3091T Retractable Cable
- SR-502 N Series Junction Box Sealed Strain Relief Connector Data Sheet
- SR-502 Series Junction Box Sealed Strain Relief Connector Data Sheet
- ZB-4-QC-MP Zone Box Two Wire Class B Detection Circuit Data Sheet
- ELR-HD-1A-QC End-of-Line Resistors with Quick Connect Terminals Heavy Duty Zone Box Data Sheet
- ELR-HD-4-QC End-of-Line Fiberglass NEMA-4X Enclosure Data Sheet
- PWTX-200 / PWTX-500 Extension Grade Cable Datasheet