Fasteners & Mounting Clips

Stainless steel linear heat detector “J” type mounting clip with 1/4” mounting hole. Specifically designed to help simplify linear heat installations.

• Material: 304 stainless steel
• Temperature: -76°F to 572°F (-60°C to 300°C)
• LHD Cable Diameter Range: (0.145” to 0.165” (3.7mm to 4.2mm)
• Insertion Force: Approx. 2-3 lbs. (9-13 Newtons)
• Mounting Hole Diameter: 0.25” (6.35 mm)
• Resistance: UV, corrosion, and weather all excellent
• Maximum Recommended Spacing: 5ft (1.5 M).

One of the most versatile fasteners is the WAW Clip. This clip may be used for ceiling or wall mount applications, as well as all corners. The fastener is a clip which wraps around the detector and is available in either nylon (WAW-N) or polypropylene (WAW-P) material depending upon the installation environment. As a general rule, nylon WAW clips are preferred for applications where the ambient temperature is expected to be low, such as in freezer warehouses. The installation temperature range for the WAW Series fasteners is -40°F (40°C) to 190°F (88°C).

OHS-1 clips are available in several different configurations and are used mainly as an intermediate fastener between corner-mounted WAW Clips, which provide the main support.

• OHS-1 clip is an all-purpose fastening clip.
• Material: Galvanized steel
• Mounting Hole Diameter 3/16″ (4.8mm)
• Resistance: UV and corrosion
• Maximum Recommended Spacing: 5 ft (1.5 M).

OHS-SS clips are available in several different configurations and are used mainly as an intermediate fastener between corner-mounted WAW Clips, which provide the main support.

• OHS-SS clip is an all-purpose fastening clip.
• Material: 304 Stainless steel
• Mounting Hole Diameter ¼” (6.4mm)
• Resistance: UV, corrosion, and weather all excellent
• Maximum Recommended Spacing: 5ft (1.5 M).

The BC-2 Series Beam Clamp assembly consists of a beam clamp, polypropylene WAW Clip, and snap button. The BC-2 utilizes a plated steel clamp and is recommended for general indoor use. These versatile fasteners may be used for mounting Protectowire on cable trays, conveyors, angle irons, I-beams, and bar joists.

The BC-3 Series Beam Clamp assembly consists of a beam clamp, nylon WAW Clip (type N) or a polypropylene WAW Clip (type P), and snap button. The BC-3 utilizes a heavy duty zinc plated clamp that is suitable for both indoor and outdoor use. These versatile fasteners may be used for mounting Protectowire on cable trays, conveyors, angle irons, I-beams, and bar joists.

The RMC-2 L-bracket consists of a steel bracket, WAW-N clip, and an acetal copolymer snap button. The bracket is 6.7 inches long (17cm) and contains 5 mounting holes which provide height flexibility when installing the detector.

• Material: Plated Steel
• Mounting Hole Diameter ¼” (6.4mm)
• Resistance: UV and corrosion
• Maximum Recommended Spacing: 5ft (1.5 M).

The RMC-3 L-bracket consists of a 304 stainless steel bracket, WAW-N clip, and acetal copolymer snap button. The bracket is 6.7 inches long (17cm) and contains 5 mounting holes which provide height flexibility when installing the detector.

• Material: 304 Stainless Steel
• Mounting Hole Diameter ¼” (6.4mm)
• Resistance: UV, corrosion, and weather all excellent
• Maximum Recommended Spacing: 5 ft (1.5 M).

The TR-5G Insulated Standoff can be used to install Protectowire on or above coal conveyors or from other applicable mechanical structures. The standoffs may be installed through holes in covers or brackets by means of the 1/4″-20 locknuts provided. In another type of installation, the standoffs may be connected to threaded rods suspended from the ceiling by means of coupling nuts (not provided). Since this fastener does not grasp the detector tightly, it is necessary to use other fasteners, such as WAW Clips, to place sufficient tension on the Protectowire to prevent it from drooping.

Temperature Rating: -70°F to 300°F ( -57°C to 149°C)

EMS-A-CO is used when drilling into mounting surfaces is prohibited or not possible, such as transformer surfaces. The adhesive mounting system consists of EMS cable mounts, PLT cable ties, and approved industrial adhesive. Constructed of black weather-resistant nylon it is suitable for outdoor use when used with approved adhesive. It should not be used in chemically harsh environments or in areas where temperatures are less than 0°F (-17°C) or exceed 180°F (82°C). This product requires the use of SIKAFLEX-291 adhesive for proper usage.

Used with EMS Cable Mounts, the PLT1S-CO is constructed of weather-resistant nylon suitable for outdoor use.

The SIKAFLEX-291 Industrial Adhesive is used with EMS Cable Mounts. It should not be used in chemically harsh environments or areas where temperatures are less than -40°F (-40°C) or exceed 194°F (90°C).

Tack-Free Time: 60 minutes

Rate of Cure: 0.25″ (6.35mm) x 0.25″ (6.35mm) bead 4 days at 74°F (23°C) and 50% relative humidity

This single piece UV resistant nylon clip consists of a special snap-lock design, which allows for easy installation or removal of the Protectowire Linear Heat Detector from the fastener. The HPC-2 contains an internal spring steel drive clamp with gripping teeth that will accommodate mounting surfaces from .06 to .25 inches (1.5 – 6.4 mm) thick, making the clip suitable for a wide range of applications, such as cable trays, storage racks, and ceiling joists.

The CC-2N and CC-2W cable tray clips consist of a “caddy” style steel clamp, WAW, and snap button. They are designed to attach to the cable tray side rails and secure the Protectowire in the recommended size wave pattern. The clips are available in two models, each designed to accommodate different material thickness.

• Model CC-2N will clamp to material from .06 to .16 of an inch (1.6 – 4.0 mm) thick
• Model CC-2W is designed for material ranging from .16 to .25 of an inch (4.0 – 6.4 mm) thick

The CC-10 Series Clips are similar in concept to the CC-2s, but utilize a different “caddy” style drive clamp. The CC-10s will accommodate a material thickness of up to .50 inch (12.7 mm) and also provide a means of locking the fastener in place by using one of the threaded mounting holes. These clamps are particularly useful in applications where excessive vibration may be encountered.

• The CC-10N is designed for materials ranging from .13 to .25 of an inch (3.2 – 6.4 mm) thick
• The CC-10W will clamp to materials from .31 to .50 of an inch (7.9 – 12.7 mm) thick

Note: By adding the suffix “-S” to the above model numbers, the fasteners are provided with a 1/4-20 hex nut and 3/4 x1/4-20 hex screw which are designed to securely hold the clamp to the mounting surface.

The PM-3A is a double loop strap suitable for .75″ to 2″ pipes. The straps are made of black weather-resistant 6/6 nylon and may be used in temperatures ranging from -40°F (-40°C) to 185°F (85°C).

• Length 7.6” (193mm) x Width 0.19” (4.8mm) x Thickness 0.052” (1.3mm)

The PM-3B is a double loop strap suitable for 2.5″ to 3.5″ pipes. The straps are made of black weather-resistant 6/6 nylon and may be used in temperatures ranging from -40°F (-40°C) to 185°F (85°C).

• Length 11.8” (300mm) x Width 0.19” (4.8mm) x Thickness 0.052” (1.3mm)

The PM-3C includes 2 single loop straps suitable for 4″ to 6″ pipes. They are made of black weather-resistant 6/6 nylon and may be used in temperatures ranging from -40°F (-40°C) to 185°F (85°C).

• 2 pieces
• Length 28.3” (719mm) x Width 0.5” (12.7mm) x Thickness 0.085” (2.2mm)
• Length 4.8” (122mm) x Width 0.19” (4.8mm) x Thickness 0.052 (1.3mm)